Manual
Tips
- MIDI works through USB-C or BLE connection
- OSC works over WiFi
- The configuration page is accessible through Wifi only
Quick start
- All Pipo comes with a default factory preset.
- Plug the USB cable to make sure it is charged (charge led goes off when full)
- Switch it on with the small slider switch on the lower left side
- MIDI data will flow right away through USB when sensors are excited (Pipo does not send data when nothing is moving/changing)
To access the config page (to adjust MIDI output, enable OSC, etc...) :
- Connect to the Pipo WiFi with your mobile or PC (look for a Wifi named Pipo-Motion, Pipo-Range, etc...)
- Connect to it using the password pipo1234
- Once you are connected, you can access the config page by entering the following appropriate URL in your web browser pipo-motion.local,pipo-analog.local or pipo-range.local
- You can now adjust all the settings and/or connect Pipo to your local network